Spectralink 8002 User Manual

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP) 

32 

PN: 1725-36034-001_B.doc 

WPA2-PSK 

 The security features of WPA2 (Wi-Fi Protected Access) 

using PSK are available and may be used if supported by the APs in 
the facility. Select either 

Passphrase

 and enter a passphrase between 

eight and 63 characters in length or 

Pre-shared Key

 and enter the 256-

bit key code. 

Regulatory Domain 

The Regulatory Domain will default to 

None

 on the handset display. 

FCC requirements dictate that the menu for changing the domain be 
available by password, which in this case is the 

LINE

 key. To change 

the domain, press 

LINE

 and then enter the digits that represent the 

site’s domain. Note that both digits must be entered.  

01

  North America 

02 

 Europe (except Spain and France); Japan (channels 1-13) 

04

  Spain 

05  

France

 

06  

Korea

 

 

As of this writing, Spain and France are adopting the general 
European regulatory rules. Check with your wireless LAN 
administrator or supplier regarding which domain to enter in these 
countries. 

Transmit Power 

Available Transmit Power is regulated by domain. The Regulatory 
Domain setting above affects the options available for this setting. The 
default setting is 

Maximum

 which in North America is 100 mW. The 

Maximum in other domains is 30 mW. Transmit Power may be set to 
a lower number if necessary by selecting one of the other levels. If 
changed from the default, ensure the Transmit Power setting is the 
same on all handsets and all APs. 

 

Power is limited to 30mW in regulatory domains other than North 
America. 

 

 

See Appendix A for the full list of certified countries and the 
corresponding domain for each. 

VoIPon    www.voipon.co.uk    sales@voipon.co.uk    Tel: +44 (0)1245 808195     Fax: +44 (0)1245 808299