Spectralink BPX100 User Manual

SpectraLink Corporation 

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide 

Part Number: 72-1004-01-H.doc 

Page 9 

Basic Operation 

Turn the handset on  Press and hold the 

Power On 

key for about one second, until two 

chirps sound. Release the key. The in-service tone sounds and the 
extension number displays. The handset is now in standby mode, 
ready to make and receive calls. 

Turn the handset off  While in standby mode, press and hold the 

Power Off

 key. One 

chirp sounds and the handset turns off. The handset cannot be 
directly turned off during a call. End the call first and then turn the 
handset off. 

Make a call or 

go off hook 

Press the 

Start Call

 key and then dial the number. 

Select a line  If multiple lines are available, your telephone system may require 

you to select a line before dialing a number. Press the 

LINE

 key and 

the number key of the line you wish to use. You may hear a dial 
tone. 

Dial a number  Dial calls with the handset exactly as with your desk phone. You 

may dial extension numbers, internal numbers, or make external 
calls, depending on the setup of your PBX. You may hear a dial 
tone, then press the number keys to dial the number. 

Answer a call  The handset will ring or vibrate to alert you to an incoming call. 

Additionally, a line number on the display may flash, and the display 
may show information about the call, such as caller’s name and 
extension. 
To answer a call, press the 

Start

 

Call

 key, hold the earpiece to your 

ear and speak with a normal tone of voice. 
If you are on a call and hear subdued ringing, a call is coming in on 
a second line. The line number on the display may be flashing. To 

answer this call, put your first call on hold and press the 

LINE

 key, 

then press the line number of the second call. 

Headset answer  When a headset is plugged into the handset, the 

Start

 

Call

, 

0 – 9, *

 

or 

#

 key may be pressed to answer a call. 

Hang up  To hang up, press the 

End

 

Call

 key. Be sure to do this at the end of 

each call. 

Unlock Keypad  Press the 

Unlk

 softkey, then 

#

, to unlock the keypad. 

Lock Keypad  Press 

FCN

, then 

Select

, to activate 

Lock

 

Keys

 on the Standby Menu. 

Change speaker volume  You may increase or decrease the volume of the speaker while in a 

call by pressing the corresponding 

Up

 and 

Down

 buttons located on 

the left side of the handset. 

Change ring volume  You may increase or decrease the ring volume on the NetLink i640 

Wireless Telephone by pressing the corresponding 

Up

 and 

Down

 

buttons located on the left side of the handset while it is ringing. 

Silence while ringing  You may silence a ringing handset by pressing the 

End

 

Call

 button. 

This action does not interrupt the call and the caller may leave a 
voicemail message. 

Backlight  The backlight comes on when any key is pressed or when there is an 

incoming call and stays on for ten seconds. It turns off after ten 
seconds if another key is not pressed within that period.