Panasonic UF-5950 User Manual

Loading Documents

c O

1. Be sure the document(s) is free of staples, paper clips, and is not torn, greasy, or covered by foreign

objects.

2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge

placed into the machine stops.
If sending multiple pages, make sure that the bottom sheet enters first. You can also stack up to 50
PAGES on the ADF at one time by setting the documents as stairs shape as the figure below. If you
have more than 50 pages, wait until transmission, or storing in memory starts as pages feed through,
place any remaining pages on top of the last page in the feeder.

3. Adjust the Document Guides to center the document on the ADF.

When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialing procedure.

ENTER STATION(S)

THEN PRESS START 00%

NOTE

1. The document limitation to send multiple pages is as follows.

* Please note that although the size, and thickness meets the specifications, you might not be

able to set 50 pages with some types of papers.

2. Transmitting documents longer than 14 in (356 mm) requires user's assistance.
3. When transmitting documents longer than Letter size (8.5 x 11 in), please extend the sub-tray

as shown below.

How to Load Documents

Document Size

Document Thickness

Up to 20 pages

Up to 10.1 x 14.3 in (257 x 364 mm)

0.0024 - 0.0048 in

Up to 50 pages* A4 or Letter size

0.0024 - 0.0039 in

CORRECT

INCORRECT

Document Guides

Document Sub Tray