Sprint Nextel NNTN9124A User Manual
131
Blu
e
to
oth
Bluetooth Status Indicators
The Bluetooth status indicators on your phone’s display
screen shows your Bluetooth connection status at a
glance:
screen shows your Bluetooth connection status at a
glance:
None
– Bluetooth is disabled (default status).
– Status indicator will be black when Bluetooth is
turned on, but no device is connected.
– Status indicator will turn light gray when
connected to a Bluetooth device.
Connecting and Disconnecting
Bluetooth Devices
Bluetooth Devices
Connect New Devices
To connect with a new device, you need to pair with it.
You only need to do this once for each device; to
connect again, see “Reconnect Devices” on page 132.
You only need to do this once for each device; to
connect again, see “Reconnect Devices” on page 132.
1.
Make sure the device you are pairing with is in
discoverable mode.
discoverable mode.
2.
Touch
>
Settings > Wireless & networks >
Bluetooth settings
.
3.
Touch
Bluetooth
to turn on and scan. If Bluetooth is
already on, touch
Scan for devices
.
4.
Touch a device to connect.
5.
If necessary, touch
OK
, or enter the device passkey
(for example
0000
) to connect to the device. When
the device is connected, the Bluetooth connected
indicator
indicator
appears in the notifications bar.
Note:
This feature requires an optional accessory.
Tip:
Refer to the guide that came with the device for details.
Note:
Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the
laws and drive safely.
cause distraction and may be illegal. Always obey the
laws and drive safely.
NNTN9124A_i1x_Rubicon_Nextel_UG.book Page 131 Thursday, June 16, 2011 2:58 PM