Sony FS-1570 User Manual

11  NBDP TRANSMITTING, RECEIVING 

11-11 

To use automatic telex, you will need to register three items: 

• 

Answerback code 

• 

Scan groups 

• 

Station names 

 
Registering answerback code 

The coast station assigns a Telex number. This number functions as an answerback code. 
An answerback code contains the following: 

OOOOO  SHIP  X

OOOOO: Coast station-assigned five-digit telex code
SHIP:      Ship name
X:            For shipboard station, normally X is entered.

 

The procedure for registering the answerback code is the same as which appears on page 
9-1. If an answerback code was registered before the commissioning of the coast station, 
a new answerback code must be entered. To enter a new answerback code, contact 
FURUNO or an authorized FURUNO agent or dealer. 
 
Registering scan groups 

The central system emits a free-signal to indicate a coast station radio channel is in idle 
condition and available for ship-to-shore calls. The free-signal is detected and recognized 
by the shipboard equipment as a permission to start the transmission. Then, the shipboard 
operator initiates a call. 
 
You can scan search for the free-signal automatically by registering coast station radio 
channels in scan group(s). The procedure for registering scan groups for coast station use 
is the same as that which appears on page 9-7. 
 
Registering stations 

The next step is to enter station name. The procedure is the same as that shown on page 
9-3.  
 
 

offered by Busse-Yachtshop.de      email: info@busse-yachtshop.de