Sony FS-2570 User Manual

 

You can enter desired frequency by channel or TX and RX frequencies. The handset may 
be ON HOOK or OFF HOOK. To set the SSB radiotelephone to 2182 kHz/J3E 
automatically, press the [1/ RT/2182] key more than two seconds. 
 

After selecting class of emission and frequency, you can transmit by pressing the PTT 
switch on the handset. Output power is shown on the display. 
 

1.  At the radiotelephone screen, choose class of emission (mode) as follows: 

Rotate the [ENTER] knob to choose MODE and then push the [ENTER] knob. 

MODE:   SSB          SIMP           HIGH

 

TX:  2182.0

KHZ

RX: 2182.00

KHZ

VOL

SEN

S

AGC :

FAST

IA

0.0A

 

 

 

 

TLX
AM

 

Rotate the [ENTER] knob to choose mode desired and then push the [ENTER] knob. SSB: 

Single Sideband, TLX: Telex, AM: AM. (You cannot transmit on the AM mode.) 

2.  AGC is automatically selected according to mode. AGC FAST: SSB, AGC OFF: TLX, 

AGC SLOW: AM. However, you may change it as below. 

a)  Rotate the [ENTER] knob to choose AGC and then push the [ENTER] knob.   

MODE:   SSB          SIMP           HIGH

 

TX:  2182.0

KHZ

RX: 2182.00

KHZ

VOL

SEN

S

AGC : FAST

IA

0.0A

FAST

FAST

SLOW
FAST

 

b)  Rotate the [ENTER] knob to choose OFF, SLOW or FAST as appropriate and then push 

the [ENTER] knob.   

 
 

offered by Busse-Yachtshop.de      email: info@busse-yachtshop.de