Furuno FS-1575 FS-2575 FS-5075 User Manual
6. MENU OPERATION
6-24
6.21
Alarm Lists
The [ALARM] menu shows all currently violated alarms. When an error occurs, a pop-
up message and the flashing error icon appear on the screen. Press the CANCEL key
to close the pop-up message and stop the flashng of the error icon. When the error is
removed, the error icon disappears.
up message and the flashing error icon appear on the screen. Press the CANCEL key
to close the pop-up message and stop the flashng of the error icon. When the error is
removed, the error icon disappears.
Rotate the ENTER knob to select [ALARM] on the [MENU] screen then push the knob.
The following screen appears.
The following screen appears.
There are seven kinds of errors: TX PLL UNLOCK, RX PLL UNLOCK, WR1 PLL UN-
LOCK, WR2 PLL UNLOCK, MAIN AMP HEATED, SHIP’S MAIN FAILURE, VC ER-
ROR.
LOCK, WR2 PLL UNLOCK, MAIN AMP HEATED, SHIP’S MAIN FAILURE, VC ER-
ROR.
Errors are displayed in the order shown above, not in the order of occurrence. An error
is deleted from the list when the cause for the error is removed.
is deleted from the list when the cause for the error is removed.
Default: [2]
Turn beep on (setting: [1] - [3])
or off (setting: [0]) when a key
is pressed.
or off (setting: [0]) when a key
is pressed.
Default: [MUTE]
Turn the speaker on or off
when the handset is off hook.
when the handset is off hook.
Rotate the ENTER knob
to set volume then push
the knob.
to set volume then push
the knob.
Default: [500NM]
Turn sound alarm on or off
for the distress alarm
received from a ship in
distress which is more than
500 NM from your ship.
for the distress alarm
received from a ship in
distress which is more than
500 NM from your ship.
Error icon
TX PLL UNLOCK
WR1 PLL UNLOCK
WR1 PLL UNLOCK