Furuno FS-1575 FS-2575 FS-5075 User Manual

7.  NBDP SYSTEM OVERVIEW

The [Operate] menu mainly controls transmission and reception.

The [Window] menu lets you display the corresponding data of the window below.

1: Select a station on the station list.
2: Start macro operation. For details, see 
section 10.10.
3: Select a file then transmit it.
4: Stop sending a file.
5: Start/stop frequency scanning.
6: Select communication mode for reception; 
AUTO, ARQ, FEC.
Note: Do not select DIRC (only for IB-583).
7: Enable timer programming.
8: Set TX mode and subscriber's ID number and 
start manual calling.
9: Set TX and RX frequencies and start waiting 
for reception.
0: Set ITU or user channel and start waiting for 
reception.

1: Display desired calendar month and year. To 
change year or month, select item with the 

↑ or 

↓ key and change setting with the ← or → key.

2: Display all distress frequencies (see the fol-
lowing table).
3: Turn on or off the screen saver function. For 
details, see section 8.7.

1: Call Station

3: File to Send
4: Cancel Sending

5: Scan (Start/Stop)

6: Manual Reception

7: Timer Operation

8: Manual Calling
9: Set Frequency
0: Set Channel*

Operate

2: Macro Operation 

*: Only for IB-585

1: Calendar

2: Distress Frequency Table

3: Screen Saver*     OFF    ON 

Window

*: Only for IB-585

Distress Frequencies

Telephone (kHz): 2182.0  4125.0  6215.0  8291.0  12290.0  16420.0

NBDP     (kHz) : 2174.5  4177.5  6268.0  8376.5  12520.0  16695.0

DSC      (kHz) : 2187.5  4207.5  6312.0  8414.5  12577.0  16804.5