Furuno FS-1575 FS-2575 FS-5075 User Manual

Page of 194
ii
 
SAFETY INSTRUCTIONS
Indicates a condition that can cause death or serious injury 
if not avoided.
Indicates a condition that can cause minor or moderate 
injury if not avoided. 
Indicates a condition that will result in death or serious injury 
if not avoided.
The user and installer must read the appropriate safety instructions before attempting to install 
or operate the equipment.
DANGER
WARNING
CAUTION
Warning, Caution
Prohibitive Action
Mandatory Action
DANGER
WARNING
WARNING
Never touch the SSB antenna, antenna 
coupler or lead-in insulator when the 
SSB radiotelephone is transmitting.
High voltage which will cause death or 
serious injury is present at the locations 
shown in the illustration below when the 
SSB radiotelephone is transmitting.
Antenna 
Coupler
Antenna Wire 
(High Voltage)
Indoor
Antenna 
Wire
Lead-in 
Insulator
(High 
Voltage)
Do not open the equipment.
Only qualified personnel should work 
inside the equipment.
Immediately turn off the power at 
the switchboard if water leaks into 
the equipment or something is 
dropped into the equipment.
Continued use of the equipment can 
cause fire or electrical shock. Contact 
a FURUNO agent for service.
Do not disassemble or modify the 
equipment.
Fire, electrical shock or serious injury 
can result.
Immediately turn off the power at 
the switchboard if the equipment is 
emitting smoke or fire.
Continued use of the equipment can 
cause fire or electrical shock. Contact 
a FURUNO agent for service.
Do not place liquid-filled containers 
on the top of the equipment.
Fire or electrical shock can result if a 
liquid spills into the equipment.
Do not operate the equipment with 
wet hands.
Electrical shock can result.
Turn off the power immediately if you 
feel the equipment is behaving 
abnormally.
Turn off the power at the switchboard if 
the equipment becomes abnormally 
warm or is emitting odd noises. Contact 
a FURUNO dealer or agent for advice.
Make sure no rain or water splash 
leaks into the equipment.
Fire or electrical shock can result if 
water leaks in the equipment.
Use the proper fuse.
Use of the wrong fuse can cause fire or 
electrical shock.