Uniden D1685 User Manual
English - 21
Adapter and Battery Infor-
mation
AC Adapter (Base and Charger)
Part number
PS-0035
Input voltage
120V AC, 60 Hz
Output voltage
8V AC @ 300mA
xUse only the supplied AC adapters.
xUse the proper adapter for the base & any
chargers.
xDo not place the unit in direct sunlight or
subject it to high temperatures.
Battery pack (with normal use)
Part number
BT-1021
Capacity
300mAh, 2.4V DC
Talk time
about 7 hours
Standby time
about 7 days
Battery life
about 1 year
xReplace the battery when the talk or
standby time becomes noticeably reduced.
For replacements, call the Parts Depart-
ment (see the front cover).
xWhen the battery gets low, the handset
beeps and shows a low battery alert;
recharge the battery.
Rechargeable Battery Warning
xThis equipment contains a rechargeable
Nickel-Metal-Hydride (Ni-MH) battery.
xNickel is a chemical known to the state of
California to cause cancer.
xDo not short-circuit the battery.
xThe batteries in this equipment may
explode if disposed of in a fire.
xDo not charge the batteries in any charger
other than the one specified in the owner's
manual. Using another charger may dam-
age the battery or cause it to explode.
xAs part of our commitment to protecting
our environment and conserving natural
resources, Uniden voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH
batteries within the
United States. Please
call 1-800-8-BATTERY
for information on Ni-
MH battery recycling in
your area. (RBRC® is a
registered trademark of the Rechargeable
Battery Recycling Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
Warning! The cords on this product
Warning! The cords on this product
and/or accessories contain lead,
a chemical known to the state of
California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Uniden works to reduce lead
Uniden works to reduce lead
content in our products &
accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of
the FCC rules and the requirements ad-
opted by the ACTA. On the bottom of this
equipment is a label that contains, among
other information, a product identifier
in the format US: AAAEQ##TXXXX. If
requested, this number must be provided
to the phone company.
An applicable Universal Service Order
Codes (USOC) certification for the jacks
used in this equipment is provided (i.e.,
RJ11C) in the packaging with each piece
of approved terminal equipment. A plug
and jack used to connect this equipment
to the premises wiring and telephone
network must comply with the applicable
FCC Part 68 rules and requirements
adopted by the ACTA. A compliant tele-
phone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack
that is also compliant. See installation
instructions for details.