Motorola A1200 User Manual
Motorola A1200
WAP, MMS and IMAP4 Email Service Setup Guide
All Motorola A1200 purchased from CSL outlets are already programmed with the standard setting of
@1010 or One2Free Zone. Should you wish to make a new setting or lose your original one in any
circumstances, please follow the procedures below. This service allows you to access in Hong Kong
or overseas. When you access the service from overseas, roaming charges will be incurred.
@1010 or One2Free Zone. Should you wish to make a new setting or lose your original one in any
circumstances, please follow the procedures below. This service allows you to access in Hong Kong
or overseas. When you access the service from overseas, roaming charges will be incurred.
(I)
Setup for Standard Local and Overseas WAP services
1.
Tap “
” enter main menu and according to the following step to select “
Setup
”
“
Data
Network
”
Select profile to be edited “
”
“
Edit
”
input the following parameters in
table.
Services
GPRS / CSD (local)
CSD (Overseas) only
Profile name
CSL
CSL CSD Overseas
APN
hkcsl
Leave it blank
User name
Leave it blank
Password
Leave it blank
Timeout
15 min
Off
Primary gateway IP
192.168.59.51
Port
8080
Secondary gateway IP
Leave it blank
GPRS setting
Port
0
(1)
Leave it blank
DNS server
(2)
Leave it blank
Dial in number
179111
+852179112
Query at Logon
User name
Leave it blank
Password
Leave it blank
Baud rate
9600
Line type
ISDN
Modem
CSD Setting
Timeout
5 min
(1)
Leave it blank
DNS server
(2)
Leave it blank
2.
When completed, tap “
Save
” then “
” back to main menu. .
3.
Tap “
”
“
Browser
” icon
“
”
“
Setup
”
“
Profiles
”
select any one of the profiles
“
”
“
Edit
”
input the following parameters in table.
(1010 customer)
@1010
1010 Overseas CSD
Profile name
(One2Free customer)
One2Free Zone
O2F Overseas CSD
(1010 customer)
http://wap.hkcsl.com/1010/
Homepage:
(One2Free customer)
http://wap.hkcsl.com/o2f/
Network link
CSL
CSL CSD Overseas
4.
When complete, tap “
Save
”
“
”
select the profile as default (e.g.: @1010 or One2Free
Zone)
“
Save
”
tap “
” to quit.
Note: For switching the data connection from CSD to GPRS in WAP browsing, the user requires to exit the
WAP browser and re-enters again while GPRS is in coverage.