HTC Wildfire User Manual
197 Specifications
Specifications
CPU speed
58 MHz
Platform
Android™ with HTC Sense™
Memory
ROM: 51 MB
RAM: 84 MB
RAM: 84 MB
Dimensions (LxWxT)
116.85 x 61 x 11.99 mm (4.6 x .4 x 0.47 inches)
Weight
115 grams (4.056 ounces) with battery
Display
.-inch touch-sensitive screen with 40 x 0 QVGA resolution
Network
Dual-band (800 and 1900 MHz)
CDMA000 1xRTT/1xEVDO/1xEVDO rev. A and IS-95A/B voice or
data with up to 1.8 Mbps upload and .1 Mbps download speeds
CDMA000 1xRTT/1xEVDO/1xEVDO rev. A and IS-95A/B voice or
data with up to 1.8 Mbps upload and .1 Mbps download speeds
(Band frequency and data speed are operator dependent.)
Onscreen navigation
Optical trackball
GPS
Internal GPS antenna
Sensors
G-Sensor
Digital compass
Proximity sensor
Ambient light sensor
Digital compass
Proximity sensor
Ambient light sensor
Connectivity
Bluetooth® .1 with FTP/OPP for file transfer, ADP for wireless
stereo headsets, and PBAP for phonebook access from the car kit
Wi-Fi®: IEEE 80.11 b/g
.5 mm stereo audio jack
Standard micro-USB (5-pin micro-USB .0)
stereo headsets, and PBAP for phonebook access from the car kit
Wi-Fi®: IEEE 80.11 b/g
.5 mm stereo audio jack
Standard micro-USB (5-pin micro-USB .0)
Camera
5 megapixel color camera with auto focus and flash
Audio supported
formats
formats
Playback: .aac, .amr, .ogg, .m4a, .mid, .mp, .wav, .wma
Recording: .amr
Recording: .amr
Video supported
formats
formats
Playback: .gp, .g, .mp4, .wmv
Recording: .gp
Recording: .gp
Battery
Rechargeable Lithium-ion battery
Capacity: 100 mAh
Talk time: Up to 40 minutes
Standby time: Up to 00 hours
Capacity: 100 mAh
Talk time: Up to 40 minutes
Standby time: Up to 00 hours
(The above are subject to network and phone usage.)
Expansion slot
microSD™ memory card (SD .0 compatible)
AC adapter
Voltage range/frequency: 100 ~ 40V AC, 50/60 Hz
DC output: 5V and 1A
DC output: 5V and 1A
Special features
Friend Stream, App Sharing
A Standby time specification (“specification”) is an industry standard that is only intended to allow
comparison of different mobile phones under the same circumstances. Power consumption in a
standby state is strongly dependent on factors including but not limited to network, settings, location,
movement, signal strength and cell traffic. Comparisons of different mobile phones using such a
specification can therefore only be done in a controlled laboratory environment. When using any mobile
phone in real life circumstances for which the mobile phone is intended, the standby time could be
considerably lower and will be strongly dependent on the factors as mentioned above.
comparison of different mobile phones under the same circumstances. Power consumption in a
standby state is strongly dependent on factors including but not limited to network, settings, location,
movement, signal strength and cell traffic. Comparisons of different mobile phones using such a
specification can therefore only be done in a controlled laboratory environment. When using any mobile
phone in real life circumstances for which the mobile phone is intended, the standby time could be
considerably lower and will be strongly dependent on the factors as mentioned above.
Specifications are subject to change without prior notice.