Motorola 2200 User Manual

You can configure system settings to assign a name to your Motorola Netopia® Gateway and to specify 
what types of messages you want the diagnostic log to record.

Specifies the name of your Motorola Netopia® Gateway. Each Motorola Netopia® Gateway is assigned a 
name as par t of its factor y initialization. The default name for a Motorola Netopia® Gateway consists of the 
word “Netopia-3000/XXX” where “XXX” is the serial number of the device; for example, Netopia-3000/
9437188. A system name can be 1 – 255 characters long. Once you have assigned a name to your Motor-
ola Netopia® Gateway, you can enter that name in the Address text field of your browser to open a connec-
tion to your Motorola Netopia® Gateway.

☛  

Some broadband cable-oriented Ser vice Providers use the 

System Name as an important 

identification and suppor t parameter. If your Gateway is par t of this type of network, do 

NOT 

alter the System Name unless specifically instructed by your Ser vice Provider.

Specifies the types of log messages you want the Motorola Netopia® Gateway to record. All messages with 
a level equal to or greater than the level you specify are recorded. For example, if you specify set system 
diagnostic-level 

medium, the diagnostic log will retain medium-level informational messages, alerts, and 

failure messages. Specifying 

off turns off logging.

Use the following guidelines:

• low

 - Low-level informational messages or greater; includes trivial status messages.

• medium

 - Medium-level informational messages or greater; includes status messages that can help 

monitor network traffic.

• high

 - High-level informational messages or greater; includes status messages that may be significant 

but do not constitute errors. The default.

• alerts

 - Warnings or greater; includes recoverable error conditions and useful operator information.

• failures

- Failures; includes messages describing error conditions that may not be recoverable.