Nokia 6255 User Manual
M e s s a g e s ( M e n u 1 )
Copyright © 2005 Nokia. All rights reserved.
29
Write down voice mailbox
number and process
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
Dial 8585551212, pause
5 seconds, press 1, pause
2 seconds, press 1234, press
pound key.
5 seconds, press 1, pause
2 seconds, press 1234, press
pound key.
Be precise; you will need this
information. See
information. See
Insert dialling codes
Press the * key repeatedly to cycle
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
The following dialling codes are
available:
available:
*—Bypasses a set of instructions.
+—International dialling access.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
sending any numbers that follow.
w—Waits for you to press the Call
key before sending the numbers or
codes that follow.
key before sending the numbers or
codes that follow.
Setup voice mail with dialling
codes
codes
Note: If the Right selection
key on your phone has a
network operator menu,
select
key on your phone has a
network operator menu,
select
Menu
>
Contacts
instead of
Names
.
1. At the standby mode screen,
select
Names
> .
2. Scroll to an
(empty)
speed
dialling slot and press
Assign
.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you wrote down
from Setup voice mail with
dialling codes, 30.
information that you wrote down
from Setup voice mail with
dialling codes, 30.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press
you to listen to your messages,
and press
OK
.
6. Enter a name (such as Voice
Mail), and press
OK
.