ADDI-DATA APCI-7300-3 Leaflet
Phone: +49 7229 1847-0
info
@
addi-data.com
Fax:
+49 7229 1847-222
www.addi-data.com
152
APCI-7300-3 – 1-port serial interface
APCI-7420-3 – 2-port serial interface
APCI-7500-3 – 4-port serial interface
APCI-7800-3 – 8-port serial interface
RS232, RS422, RS485, 20 mA Current Loop
Free mode configuration for each port
through MX modules
With/without optical isolation 1000 V
128-byte FIFO buffer for each port
16C950 UART downward compatible
PCI 3.3 V or 5 V
Free mode configuration for each port
through MX modules
With/without optical isolation 1000 V
128-byte FIFO buffer for each port
16C950 UART downward compatible
PCI 3.3 V or 5 V
The APCI-7xxx-3 communication boards are configured by
inserting MX modules which the board identifies auto-
matically. The 1- to 8-port serial interfaces APCI-7xxx-3 can
be used as universal PCI boards in 3.3 V or in 5 V systems,
and in PCI or PCI-X systems. The serial interfaces can be
configured through modules in the following modes:
RS232, RS422, RS485 (with or without optical isolation)
and 20 mA current loop (with optical isolation).
The MX modules with optical isolation allow a protection
up to 1000 V for the use in noisy environments where
earth loops can occur. The I/O lines are protected against
short-circuits, fast transients, electrostatic discharge and
high-frequency EMI. The interface is supported through a
128-byte FIFO buffer for sending and receiving data and
guarantees reliable operation at high transfer rates.
inserting MX modules which the board identifies auto-
matically. The 1- to 8-port serial interfaces APCI-7xxx-3 can
be used as universal PCI boards in 3.3 V or in 5 V systems,
and in PCI or PCI-X systems. The serial interfaces can be
configured through modules in the following modes:
RS232, RS422, RS485 (with or without optical isolation)
and 20 mA current loop (with optical isolation).
The MX modules with optical isolation allow a protection
up to 1000 V for the use in noisy environments where
earth loops can occur. The I/O lines are protected against
short-circuits, fast transients, electrostatic discharge and
high-frequency EMI. The interface is supported through a
128-byte FIFO buffer for sending and receiving data and
guarantees reliable operation at high transfer rates.
Features
Asynchronous communication adapter
•
PCI 3.3 V or 5 V
•
Modular mounting through MX modules
•
1 socket for 1-port serial interface (APCI-7300-3)
2 sockets for 2-port serial interface (APCI-7420-3)
4 sockets for 4-port serial interface
(APCI-7500-3 and APCI-7500-3/4C)
8 sockets for 8-port serial interface (APCI-7800-3)
Can be configured as RS232, RS422, RS485 with/without
2 sockets for 2-port serial interface (APCI-7420-3)
4 sockets for 4-port serial interface
(APCI-7500-3 and APCI-7500-3/4C)
8 sockets for 8-port serial interface (APCI-7800-3)
Can be configured as RS232, RS422, RS485 with/without
•
optical isolation, 20 mA Current Loop (active, passive),
with optical isolation through separate MX modules
Automatic addressing through BIOS
with optical isolation through separate MX modules
Automatic addressing through BIOS
•
Automatic module identification
•
128-byte FIFO buffer for sending and receiving data
•
Programmable transfer rate
•
5, 6, 7 or 8-bit character
•
1, 1½ or 2 stop bits
•
Parity: even, odd or none
•
Automatic transmitter control for RS485 and
•
transmitter control through FIFO level
Common interrupt
Common interrupt
•
Safety features
MX modules available with optical isolation 1000 V
•
Creeping distance IEC 61010-1 (VDE411-1)
•
Protection against fast transients (Burst)
•
Short-circuit protection for RS422 and RS485
•
Detection of false start bits
•
Internal diagnostic possibility, break, parity,
•
overrun and framing error
Applications
Industrial serial communication
•
Data acquisition • Industrial process control
•
Multi-user systems
•
PLC interface
•
Modem and printer control
•
Multidrop applications
•
Weighting devices
•
...
•
Software drivers
A CD-ROM with the following software and programming
samples is supplied with the board.
samples is supplied with the board.
Standard drivers for:
Windows (32-bit)/XP/2000/Server 2003: Standard COM driv-
ers. Windows 7 on request.
Drivers for Linux. Integrated in the kernel from 2.6.26.
ers. Windows 7 on request.
Drivers for Linux. Integrated in the kernel from 2.6.26.
Samples for the following compilers:
Microsoft VC++ 5.0
Visual Basic 5.0
Delphi 4
Visual Basic 5.0
Delphi 4
On request
MS-DOS, RTX
Free driver download on the web:
www.addi-data.com/download
www.addi-data.com/download
PLC
PLC
Modem
Embedded
system
Port 1
RS485
Port 3
TTY
20 mA
Current
Loop
Port 4
RS232
optically
isolated
Port 2
TTY
20 mA
Current
Loop
Application example for APCI-7500-3
IPC
APCI-7500-3
APCI-7800-3
APCI-7500-3/4C
1 to 8-port serial interface, RS232, RS422, RS485,
20 mA CL, modular mounting through modules
20 mA CL, modular mounting through modules
32-bit
Also for
CompactPCI™
See CPCI-7500
Also for
see APCIe-7xxx