KYOCERA 2001832 User Manual

Sprint-approved or Kyocera-approved batteries and 
accessories can be found at Sprint Stores or through 
Kyocera; or call 1-866-866-7509 to order. They are also 
available at 

www.sprint.com

.

Battery Capacity

Your device is equipped with two Lithium Ion (Li-Ion) 
batteries. It allows you to recharge your battery before it 
is fully drained.

When the battery level drops to 15%, a pop-up window 
warns you that the battery is low. When the battery level 
drops to 0%, the device shuts down.

Installing the Battery

䊳

See “Setting Up Your Device” on page 2.

Removing the Battery

1.

Make sure the device is off so that you do not lose 
any stored numbers or messages.

2.

Firmly press your thumbs against the battery cover 
and push upward to remove it.

3.

Grasp the white pull-tab extending from the battery 
pack and pull the battery out of its compartment.

Use only Sprint-approved or Kyocera-approved 
batteries and chargers with your device. The 
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the 
risk that your device will overheat, catch fire, or 
explode, resulting in serious bodily injury, death, 
or property damage.

Long backlight settings, searching for service, vibrate 
mode,

 browser use, and other variables may reduce 

the battery’s talk and standby times.

Watch your device’s battery level indicator and charge the 
battery before it runs out of power.

Do not handle a damaged or leaking Li-Ion 
battery as you can be burned.