Panasonic 700 User Guide
Section 700 - Operation
Chapter 4. Key Telephone Features
DBS-2.3/9.2-700
DBS Manual - Revised April 2000
4-19
• “Hold TRK #XX” (where “XX” is the outside line number) appears on the
display.
To release a call placed on System Hold from the extension that
placed it there:
placed it there:
Press the line key that is flashing green.
• The line LED stops flashing and remains lit.
• “CO TALK #XX” (where “XX” is the outside line number) appears on the
display.
To release a call placed on System Trunk Hold from a different
extension:
extension:
Press the line key that is flashing red.
• The line LED turns green and stops flashing.
• “CO TALK TRK #XX” (where “XX” is the outside line number) appears
on the display.
Related Programming
• FF1 (System): Recall Timer for Attendant-Held CO Calls
• FF1 (System): Recall Timer for Attendant-Held Intercom Calls
• FF1 (System): Recall Timer for Extension-Held CO Calls
• FF1 (System): Recall Timer for Extension-Held Intercom Calls
• FF1 (System): Trunk Line Automatic Hold
• FF1 (System): Non-Appearing Central Office Line Hold
Considerations
• When using an outside line for which there is no line key on your
extension, press the HOLD key to place the call on hold and then press a
vacant line key. Release the held call by pressing HOLD again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)
vacant line key. Release the held call by pressing HOLD again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)