Panasonic 700 User Guide

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-39

2.  Dial the telephone number.

The dialed number appears on the display.

3.  Complete the call and replace the handset.

• The line LED changes from green to red and then goes off.

• The time and date reappears on the display.

• FF1 (System): SMDR Display Start Timer for CO Calls

• FF5 (FF Keys): FF Key Assignments for Extensions

• The duration of a call appears on the display while the call is in progress (if 

enabled in programming). 

• In CPC-A and CPC-B Versions prior to 3.1, the SMDR Display Start 

Timer can be set to start 16 or 30 seconds after the last digit of the 
telephone number is dialed. 

In CPC-AII and CPC-B Version 3.01 or higher, the timer can be set to start 
at 5, 16, or 30 seconds.

(All Versions)

Conference Calls allow an extension user to add a party to an existing 
conversation.

Extension users can create the following types of Conference Calls:

• One outside line and two extensions 

• Two outside lines and one extension 

• One outside line and three extensions 

• Two outside lines and two extensions