Panasonic 700 User Guide

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-57

Tone Calling. With tone calls, a ringing tone is sent to the called extension.

System programming determines whether the DBS uses voice or tone calling 
as a default. If voice calling is the default, dialing “1” after the extension 
number changes the call to a tone call. If tone calling is the default, dialing 
“1” results in a voice call.

1.  Pick up the handset.

The phone issues intercom dial tone.

Note: If you are calling from an extension programmed for Prime Line 
Preference, press the FF key programmed for intercom operation.

2.  Dial the extension number (10-69) or (100-699).

3.  If the system default is tone calling, dial “1.”

• “Talk-EXT XXX” (where “XXX” is the extension) appears on the 

display. If the extension name has been stored, that name appears on 
the display after “Talk” instead of “-EXT XX.”

• The EXT LED lights.

4.  Complete the call and replace the handset.

The EXT LED goes off.

1. Press 

the 

HOLD key.

• The EXT LED flashes.

• “Hold-EXT XXX” (where “XXX” is the extension) appears on the 

display.

2.  Dial the number of the extension to which the call will be transferred.

3.  If the system default is tone calling, dial “1.”

“Talk-EXT XXX” (where “XXX” is the extension) appears on the 
display.