Panasonic 700 User Guide

Page of 394
Chapter 4. Key Telephone Features
Section 700 - Operation  
4-60
DBS Manual - Revised April 2000
DBS-2.3/9.2-700
2. Press 
the 
REDIAL key.
The last number dialed appears on the display.
3.  Complete the call and replace the handset.
The line key LED changes from green to red and then goes off.
Considerations
• If the Auto Flash Redial feature is set, you can flash the outside line once 
by pressing the REDIAL key at the busy tone. You can then redial the last 
number dialed.
• The Last Number Redial feature can redial a number up to sixteen digits 
long.
• A maximum of five chained Speed Dialing codes can be redialed. See 
Line Appearances
(All Versions)
The DBS provides up to four types of line appearances, depending on the 
CPC version used.
The following table summarizes how each type of line appearance is used:
Table 4-7.  MCO and ML key definitions
Key
Definition
DSS/BLF Appear-
ances
DSS/BLF keys provide one-touch dialing, direct station selection 
(DSS), and busy lamp fields (BLF) for extensions.
Direct Line (DL) 
Appearances 
DL keys are used to originate and receive calls over specific trunk 
numbers.
Multi-CO (MCO) 
Appearances
MCO keys are used to originate and receive CO calls.
Multi-Line (ML) 
Appearances
ML keys are used to originate and receive CO line calls and intercom 
calls.