Panasonic 700 User Guide

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-65

(CPC-AII and CPC-B Version 2.0 or higher)

You can make and receive both CO line calls and Intercom Calls using a 
Multi-Line (ML) key. Each extension can have up to 24Multi-Line keys. The 
Attendant can have up to 24 Multi-Line keys. 

See “ML/MCO Separation” (page 4-66) for information on assigning both 
ML and MCO keys to the same system (CPC-AII and CPC-B Version 4 or 
higher).

• FF1 (System): Least Cost Routing (LCR) Access

• FF2 (Trunks): Pooled Trunk Access for Group “9”

• FF2 (Trunks): Pooled Trunk Access for Group “81-86”

• FF3 (Extension): Forced Least Cost Routing

• FF5 (Keys): FF Key Assignment (all)

• FF8 (LCR) LCR Settings (all)

• A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall 

calls, and call-forward calls. 

To originate a trunk call

Press an idle ML key.

The key blinks (green) as the call is 
made.

To place a call on Exclusive Hold (page 4-37)

Press the ML key.

To place a call on System Hold (page 4-18)

Press the HOLD key.

To transfer a call

Press HOLD, dial the destination exten-
sion, then press PROG.