Panasonic 700 User Guide

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-83

• If a ML or MCO key is assigned line group number 9 and LCR has been 

activated, LCR is selected automatically.

• Press the ML or MCO key that flashes red to answer incoming calls.

• If one group is set aside for data lines, this feature can be used when a line 

is needed for operations such as data transmission via modem. 

(All Versions)

Prime Line Preference allows a user to place an outside call by simply 
picking up the handset. When the user goes offhook, the trunk or trunk group 
assigned to FF1 is automatically accessed. (Be sure to program one of the 
other FF keys as an intercom key.)

1.  Pick up the handset.

• The phone issues outside dial tone.

• The LED of the accessed line key lights green.

• “CO TALK #XX” (where “XX” is the line number) appears on the 

display.

2.  Dial the telephone number.

The number appears on the display.

• FF1 (System): Least Cost Routing (LCR) Access

• FF2 (Trunks): Pooled Trunk Access for Group “9” 

• FF2 (Trunks): Pooled Trunk Access for Groups “81-86” 

• FF3 (Extension): Forced Least Cost Routing

• FF5 (Keys): FF Key Assignment

• FF3 (Extension): Prime Line Pickup