Panasonic 700 User Guide
Section 700 - Operation
Chapter 4. Key Telephone Features
DBS-2.3/9.2-700
DBS Manual - Revised April 2000
4-101
Digit Storage. Up to six digits can be stored under the VM/TRF key. This
total can be comprised of any combination of the voice mail extension
number and the special codes. If more than six digits are required, a PSD or
SSD number that contains the necessary digits can be stored under the key.
total can be comprised of any combination of the voice mail extension
number and the special codes. If more than six digits are required, a PSD or
SSD number that contains the necessary digits can be stored under the key.
Key Operations. The system responds to key operations during the transfer in
the following ways:
the following ways:
• Pressing the FLASH key cancels the VM/TRF and returns intercom dial
tone to the user. When the VM/TRF is cancelled, the incoming call is still
connected but is on hold.
connected but is on hold.
• If a valid key (CO key or second DSS key, for example) is pressed, the
VM/TRF is cancelled and the operation invoked by the key is performed.
• If an invalid key (REDIAL, for example) is pressed, the VM/TRF is
cancelled, and the user receives busy tone.
Number of digits allowed. Once VM/TRF is pressed, the user can dial up to
10 digits before completing the transfer.
10 digits before completing the transfer.
Holding calls. If a user begins to perform the voice mail transfer and the
extension cannot hold a call (one call is already on non-appearance hold, for
example), the system will keep the call in the talk state and will not allow the
voice mail transfer to be initiated.
extension cannot hold a call (one call is already on non-appearance hold, for
example), the system will keep the call in the talk state and will not allow the
voice mail transfer to be initiated.
Non-transmission. If the VM/TRF key stores a number other than a voice
mail extension number, the system does not send DSS/BLF information or
the extension number that is dialed after pressing VM/TRF.
mail extension number, the system does not send DSS/BLF information or
the extension number that is dialed after pressing VM/TRF.
Voice mail data transmission. The voice mail extension number plus the
extension number of the called party’s mailbox will be transmitted using a
dial code via the API link.
extension number of the called party’s mailbox will be transmitted using a
dial code via the API link.