Panasonic 700 User Guide

Chapter 6. SLT Features

Section 700 - Operation  

6-10

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

(All Versions)

Call Hold provides either exclusive or system hold, depending on system 
programming. With Exclusive Hold, only the extension that held the call can 
retrieve it. With System Hold, another extension can retrieve the call.

Flash the switchhook.

Flash the switchhook again.

• FF1 (System): Recall Timer for Extension-Held CO Calls

• FF1 (System): Recall Timer for Extension-Held Intercom Calls

• FF1 (System): SLT Onhook Flash Timer

• FF3 (Extensions): Single Line Telephone Hookflash (Broker’s Hold/

Conference)

• FF1 (System): Single Line Telephone Flash Control

• A held call recalls if it is not retrieved before the Hold Recall Timer 

expires. 

• If there is no response to the Hold Recall, the call transfers to the Attendant 

Phone; however, no tone sounds at an Attendant Phone if Night Mode is 
activated. 

• If you flash the switchhook during a conference call, the flash is ignored. 

• If your system is set to onhook transfer, and you have placed an outside 

call on hold and then made an intercom call, make sure the other extension