Panasonic 700 User Guide
Section 700 - Operation
Chapter 6. SLT Features
DBS-2.3/9.2-700
DBS Manual - Revised April 2000
6-17
• When you transfer a call to an extension that is busy or does not answer
and does not have Call Forwarding activated, a recall tone sounds at your
extension after Transfer Recall Timer expires.
extension after Transfer Recall Timer expires.
Call Waiting
(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
Table 6-4. Call Waiting Text Messages
Message codes 0-4 are not available.
Operation
To Set Call Waiting:
1. Lift the handset.
2. Dial the extension number.
3. Upon hearing busy tone, press “3.”
4. If you wish to send a text message, dial the desired message code (5-7 or
9).
The message displays on the called party’s phone if the called party has a
key phone. (If the called party does not have a display, the extension
continues to issue a call waiting tone.)
key phone. (If the called party does not have a display, the extension
continues to issue a call waiting tone.)
Message
Code
Code
Message
5
“Visitor Here”
6
“Need Help”
7
“Important”
9
“Emergency”