Panasonic 700 User Guide
Chapter 2. Attendant Features
Section 700 - Operation
2-8
DBS Manual - Revised April 2000
DBS-2.3/9.2-700
Attendant-Controlled Text Assignment
(All Versions)
Description
The attendant can assign text to extensions, system speed dial numbers, and
Call Waiting/OHVA text replies without using a DSS/72 or entering the
programming mode.
Call Waiting/OHVA text replies without using a DSS/72 or entering the
programming mode.
Text is assigned through the dial pad on the attendant phone.
Operation
To assign names to extensions:
1. Pick up the receiver or press the ON/OFF key.
2. Press
PROG.
3. Dial
#2.
4. Enter the extension’s port number. (This must be entered as a 3-digit
number if CPC-B is used or a 2-digit number if CPC-A or CPC-AII is
used. If necessary add leading zeros.)
used. If necessary add leading zeros.)
5. Press
AUTO to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 on page 2-10 to enter
letters and/or numbers.
Press FLASH after each letter or number.
Press CONF to switch between numbers and letters.
7. To store your entry, press HOLD.
To assign names to System Speed Dial numbers:
1. Pick up the receiver or press the ON/OFF key.
2. Press
PROG.
3. Dial
#1
4. Press
AUTO.
5. Dial the desired of system speed dial number (00-89).