Panasonic 700 User Guide

Section 700-Operation

Appendix A. EX 1.0 Feature Update

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page A-13

• Or, to exit the directory without selecting a number to dial, 

press the END key or go on-hook.

Incompatibility with older phone versions.   Directory Mode is available 
on the 44-Series phones only.

Hot Dial Pad and Directory Mode.   The Hot Dial Pad feature (FF3 
ExtPort# 48#) will not work on an extension in Directory Mode.

This feature applies to the 44-Series small-display phone only (i.e., phones 
with a 2-line LCD display).

When the phone is in Variable Mode, the features for Flexible Function 
Screen select keys 1 and 2 will display during each of the following call 
states:

• During an intercom call

FF3 (ExtPort)# 28# (25-39)#

• During CO dial tone

FF3 (ExtPort)# 29# (25-39)#

• During a trunk call

FF3 (ExtPort)# 30# (25-39)#

• After dialing a busy extension FF3 (ExtPort)# 33# (25-39)#

The select keys on the 44-Series small-display phone are labeled “>” and 
“<“to the left and right of the display’s 2nd line.   Pressing select key 1 (“>” 
on the left) or select key 2 (“<“on the right) will perform the displayed 
feature.

1.

Activate Variable Mode by pressing 

.

• When you dial 

*61

 in the above sequence, the 1st line of the 

LCD will display “Variable md ON”. The display will 
return to normal when you press the second 

ON/OFF

.

• The 

*61

 code toggles Variable Mode on and off. Press 

 again to turn Variable Mode off.

2.

While the extension is engaged in an intercom call, the 2nd line 
will display select key 1 and 2 features from the Flexible 
Function Screen assigned to display in FF3 ExtPort# 28#.   The 
same applies when the extension receives CO dial tone (FF3