Panasonic 700 User Guide

Appendix A. EX 1.0 Feature Update

Section 700-Operation

Page A-18

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

the analog device will automatically default to “1 second ON, 3 seconds 
OFF.”

Ring Patterns Not Applicable to Analog Device. The following ring 
pattern addresses will not affect the analog device:

Analog Transfer Ring Pattern FF1  2#  1#  31#  (0-6)#
SLT DISA Ring Pattern

FF1  2#  1#  34#  (0 or 1)#

Inbound Ring Pattern

FF2  (Trunk)#  17#  (0-9)#

Flash Interaction.  Any disconnect signal sent to the analog port must be 
greater than the SLT Flash Control; otherwise the disconnect signal will be 
interpreted as a flash and the call will be placed on hold.

Programming Addresses That Affect the Analog Device. The following 
addresses will control the analog device, but will not affect the digital key 
telephone:

AEC Disconnect Duration

FF1  2#  1#  35#  (0-15)#

SLT Flash Control

FF1  2#  1#  11#  (0 or 1)#

SLT Onhook Flash Timer

FF1  3#  14#  (0-6)#

AEC Disconnect

FF3  (ExtPort)#  46#  (0 

or 1)#
Analog Port on Large-Display Phone 

FF3  (ExtPort)#  51#  (0 

or 1)#
Data Security on Analog Port 

FF3  (ExtPort)#  52#  (0 

or 1)#

The MSG key on the VB-44225 Large-Display Phone adds the following 
functionality to the phone:

• Auto-Callback. If a callback message has been left by another 

extension, you can press the MSG key to place an automatic callback to 
the extension that sent the message. If more than one callback message 
has been received, pressing the MSG key will perform auto-callback in 
the order received.

• Auto-Answer Voice Message. You can press the MSG key to 

automatically access your voice mailbox. The phone will dial your 
voice mailbox and send access codes (if programmed) for retrieving 
messages. 

See Section 400 - Programming (Appendix C) for more detailed 
programming information.