Panasonic 700 User Guide

Section 700-Operation

Appendix A. EX 1.0 Feature Update

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page A-23

With CPC-EX, you can chain up to 4 SSD codes together within a fifth 
SSD number. You can also chain up to 4 SSD or PSD codes together within 
a fifth PSD number. You can include both speed-dial codes and regular 
dialed numbers into the same speed-dial number.

The maximum length of any speed-dial number is still 16 digits.

See Section 400 - Programming (Appendix C) for more detailed 
programming information.

1) Chain-Dialing Limitations and Restrictions:

• You cannot chain-dial any PSD codes within an SSD number, 

because the system would not be able to choose which extension to 
take the PSD code from (the same PSD code might exist on multiple 
extensions).

• You cannot “chain-within-a-chain”.  For example:

--  SSD Code 001 = 

AUTO

 002(will not dial out; returns busy tone 

instead)

--  SSD Code 002 = 

AUTO

 003(will dial out)

--  SSD Code 003 = 555-1212(will dial out)
(the above restriction applies to PSD codes as well)

• You cannot chain-dial PSD or SSD codes if they are both included in 

each other’s speed-dial number. For example:
--  SSD Code 000 = 

AUTO

 001(will not dial out; returns busy tone 

instead)

--  SSD Code 001 = 

AUTO

 000(will not dial out; returns busy tone 

instead)

2) The programming address for SSD Display Restriction (FF1  2#  1#  5#  

[0 or 1]#) affects SSD codes 400-499.

• If disabled (i.e., set to “0”), the numbers assigned to SSD codes 400-

499 will display during dialing. The default is “0”.

• If enabled (set to “1”), the numbers assigned to SSD codes 400-499 

will not display during dialing.

• Numbers associated with SSD codes 000-399 will always display 

during dialing.