Panasonic 700 User Guide

Chapter 2. Attendant Features

Section 700 - Operation  

2-12

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

• FF1 (System): Fourth Attendant Position

• FF1 (System): Attendant Transfer Extension

• If all ML keys on all attendants are busy, internal calls are transferred to a 

preset destination, which must be a real extension number. The forwarding 
destination cannot be the pilot number of a hunt group.

• The third and fourth attendants cannot have a DSS/72.

• Prior to CPC-B Version 2.0, the DBS supported a maximum of two 

attendant positions. 

• In previous software releases, if a user dialed “0” for the attendant group 

but the first attendant had call forwarding activated, the call would skip to 
the next attendant in the group. For example, if the first attendant activated 
call forwarding--busy/no answer, the dial “0” call would skip to the second 
attendant. If all attendants in the group activated call forwarding, dial “0” 
calls did not reach the group.

Beginning with CPC-B Version 5.0, dial “0” calls ring the first attendant, 
even if the first attendant has call forwarding activated. However, if a call is 
unanswered, it does not skip to the next attendant. The call continues to 
ring the first attendant until the caller hangs up.

• DSLTs and SLTs cannot be used for attendant positions. 

• Ringing assignments will be required for all attendants other than 

Attendant Position 1 (Port 1) and Attendant Postion 2 (when assigned to 
port 2).

(All Versions)

The intercom dial tone can be turned off at an attendant phone. Dial tone is 
turned off when a headset is used.