Panasonic 700 User Guide

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page I-21

Previously if FF1 2# 2# 7# was set for long distance only, when a long 
distance call was placed, it was not recorded by SMDR. SMDR now correctly 
prints out long distance calls.

FF1 2# 2# 7#

In previous versions, Caller-ID (ANI) information was not sent to the API 
when the incoming trunk was ISDN. In this release, the Caller-ID (ANI) 
information is sent to the API.

None

Repeating digits were sent when an SLTA was used on a T1 circuit to call 
another T1-Network node, or to call out of another T1 node to a CO. If an 
SLTA was used, to call on a T1 circuit, to another node or out of another node 
to a CO trunk, once the call was established, if digits were sent from the 
SLTA, the digits would be repeated.

Example: If you dial 12345 from an SLT, the called party receives 

1122334455)

This problem is corrected with this release.

None

Previously, if an incoming call was transferred from Station A to Station B 
(which was set for Call Forward Outside), the following events occurred-- 
when Station A's Call Forward No Answer Timer expired (after the call was 
established with an outside CO), the outside connection was terminated, and 
the call was recalled to Station A. This problem is resolved in this version.

None