Panasonic 700 User Guide
Chapter 2. Attendant Features
Section 700 - Operation
2-24
DBS Manual - Revised April 2000
DBS-2.3/9.2-700
Traffic Measurement
(All Versions)
Description
An attendant phone can track the number of outgoing and incoming calls for
each outside line number, as well as the number of times each System Speed
Dial number is used. This information can be used to evaluate trunk usage
and control costs.
each outside line number, as well as the number of times each System Speed
Dial number is used. This information can be used to evaluate trunk usage
and control costs.
To view traffic measurments:
1. Press
the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press
the
CONF key.
“C” appears on the display.
3. Dial the traffic measurment code from the table below.
For example, to check the number of outgoing calls made on an outside
line 01, enter “#90,” then “01”. If 1234 outgoing calls have been made,
“Outgoing01 1234” appears on the display.
line 01, enter “#90,” then “01”. If 1234 outgoing calls have been made,
“Outgoing01 1234” appears on the display.
Pressing the # key steps through the trunk and system speed dial numbers.
4. Press
the
ON/OFF key.
The ON/OFF LED goes off.
Table 2-3. Traffic measurement options
Operation
Code
Display
Check the number of outgoing calls made on an outside
line
line
#90NN
“OutgoingNN”
Check the number of incoming calls to a specific trunk
#91NN
“Incoming NN”
Check the number of times a System Speed Dial number
was used:
was used:
#92SS
“SYS-SPD SS”
Delete usage data:
#93
“Clear All Inform”
Notes:
NN = CO line number (01-64); SS = System Speed Dial number (00-89 or 000-199)