Panasonic 700 User Guide

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page 3-3

You can assign account codes to clients to facilitate billing and to track call 
dates and times, numbers called, and outside line numbers used. This 
information is printed for each account on the SMDR record.

(CPC-A, CPC-AII, and CPC-B Versions prior to 3.1 and 6.0 and higher)

In CPC-A and CPC-B Versions prior to 3.1, account codes are not verified. 
With CPC-AII and with CPC-B Versions 6.0 and higher, account codes may 
be verified or non-verified depending on system programming. 

Non-verified account codes can be forced or voluntary, depending on 
extension programming.

With voluntary account codes, the user is not forced to enter an account code 
before making a call. With forced account codes, the user must enter an 
account code before accessing an outside line.

Non-verified account codes can be assigned to incoming and outgoing calls. 
To assign an account code to an outgoing call, the user enters the account 
code before making the call or during the call. To assign an account code to 
an incoming call, the user enters the account code during the call.

1. Press 

the 

ON/OFF key.

• The phone issues intercom dial tone.

• The ON/OFF LED lights.

2. Press 

the 

AUTO key, then press “#.”

• “Enter Account #” appears on the display.

• If you are using a Single Line Telephone (SLT) or Digital Single Line 

Telephone (DSLT), dial “#7.”

3.  Enter the Account Code (up to 10 digits).

4. Press 

“#.”