Panasonic 700 User Guide

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page 3-23

• FF1 (System): DISA Outbound Call ID Code 1

• FF1 (System): DISA Outbound Call ID Code 2

• FF2 (Trunk): DISA Auto Answer

• FF2 (Trunk): DISA Start Time

• FF2 (Trunk): DISA End Time

In addition to the DISA ID Setting in FF1, the following procedure can be 
used to program an incoming code.

1. Press 

the 

ON/OFF key.

• The phone issues intercom dial tone.

• The ON/OFF LED lights.

2. Press 

the 

CONF key.

3. Dial 

“#7.”

4.  Enter the DISA code.

5. Press 

the 

HOLD key.

6. Press 

the 

ON/OFF key.

The ON/OFF LED goes off.

• An MFR card is required for DISA. The MFR card is required to detect  

DTMF tones entered via the DISA connection.

• DISA can be used to access extensions as well as outside numbers.

• Once an incoming DISA code is entered, you cannot blank it out without 

entering the programming mode.

• Busy override cannot be used for a DISA line.

• With CPC-A and CPC-B Versions 2.0 to 2.1, DISA calls cannot access 

hunt groups.