Panasonic EB-SC3 User Manual

You can check the service charge settings or reset the settings.
d

 Main menu > Settings > Calls > Call Service > Charge 

1. [192] to scroll to the required setting 7 [5] (Select or 

Change)
(If one of the settings except for Auto display is selected, go to 
the next step.)

2. [5] (Edit) 7 Enter the PIN2 code 7 [5] (OK)
3. Follow the operation shown below:

You can set the currency unit in which your service rate is 
determined. Firstly, Personal rate must be entered.
Enter the currency unit (max. 3 characters) 7 [5] (Save)

You can set your personal rate. This is the cost that the 
service provider charges for one unit of call time.
[192] to scroll to Per unit: or Per min.: 7 Enter the 
value 7 [5] (Save)

You can set the maximum cost of calls allowed.
To set the Display credit:
[192] to scroll to Display credit 7 [6] (Change) to 
switch on/off 7 [5] (Save)
To set the Max cost:
[192] to scroll to Max cost 7 Enter the credit limit 7 
[5] (Save)

In Idle mode, the cost of the last dialled call is displayed 
automatically.

Note: The duration of one unit may vary between peak and off-peak times. 
Call charges can be calculated accordingly. However, the actual tariffs 
charged by your network operator may not be reflected in the calculation.