Palm TREOPROBLKSPT User Manual

䢇

To remove the network settings from memory, from the Configure Wireless Networks 
screen, press Menu (right softkey) and select Remove Settings. (The next time you’re within 
range and the Wi-Fi feature is turned on, you must re-create the connection to connect to 
this network.)

Press Start  

and 

select 

Settings.

Select the Connections tab, and then select Wi-Fi Prefs . 

(The 

Main and Advanced 

tabs show the status of the Wi-Fi feature and display information about an active Wi-Fi 
connection.)

Select the Power Mode tab and set any of the following:

䡲

Power Save Mode: Adjusts power consumption 
between maximizing network connection performance 
and maximizing battery life.

䡲

Connection: Sets when the Wi-Fi feature is on and 
when your device attempts to search for networks.

䡲

On button press: Leaves the Wi-Fi feature off until 
you press Wi-Fi 

 to turn it on. (After you turn the 

Wi-Fi feature on, your smartphone searches for 
available networks. If a network to which you previously connected is available, 
your smartphone automatically connects to that network.)

䡲

Always On: Leaves the Wi-Fi feature on, and your smartphone searches for 
available networks whenever the screen is awake. (If a network to which you 
previously connected is available, your smartphone automatically connects to 
that network. When this mode is enabled, you can prevent your device from 
searching for networks by pressing and holding Wi-Fi 

 to turn the Wi-Fi 

feature off.)