Palm TREOPROBLKSPT User Manual
Section 3F: Using Wireless Connections
217
Wireless Co
nnections
Sending Information Over a Bluetooth Connection
You can send an individual entry or file.
1.
Make sure the receiving device is ready to receive a
Bluetooth connection.
Bluetooth connection.
2.
Highlight the entry or file you want to send.
3.
Press Menu (right softkey) and select Beam. (If you don’t
see a Beam command, select Send… > Beam instead.
The Beam and Send menu items change names based on
the type of item you highlighted.)
see a Beam command, select Send… > Beam instead.
The Beam and Send menu items change names based on
the type of item you highlighted.)
4.
Select the receiving device in the list.
When the transmission is complete, Done appears next to the name of the receiving device.
Receiving Information Over a Bluetooth Connection
1.
Go to your Today screen.
2.
Press Start
and
select
Settings.
3.
Select the Connections tab and then select Bluetooth
.
4.
Select the Mode tab and check the Turn on Bluetooth box to turn on the Bluetooth
feature on your smartphone. (Wait about 10 seconds for the Bluetooth feature to
activate.)
feature on your smartphone. (Wait about 10 seconds for the Bluetooth feature to
activate.)
Tip
Check your battery level before establishing a Bluetooth connection. If the
battery level is low, you can’t make a Bluetooth connection.
battery level is low, you can’t make a Bluetooth connection.
Did you know?
You can synchronize using a Bluetooth connection (see “Synchronizing
Over a Bluetooth
Over a Bluetooth