Vision Fitness T8600HRC User Manual

T8600 HRC TREADMILL

OWNER’S MANUAL SUPPLEMENT

- U.S. made industrial grade motor, with 

full sealed bearing construction

- Easy access to motor brushes
- Open frame design for superior 

ventilation

- Internal Fan

- Internal Fan

- 12% incline. 

- Starting speed of .5 mph and a maxi

mum speed of 12 mph.

- Spacious 20” x 60” running area

- 1” Thick Commercial-Grade phenoliccoated 

deck, double sided.

TM

- Cool-Weave

TM

Design helps to disperse heat    

over a greater surface area.

- Water bottle/walkman holder.

- Your treadmill is designed with a Red    

Emergency Stop Button that will cut power to 
the treadmill if pressed down.

The T8600HRC has built in heart rate control along with 6 programs from intervals to weight loss, each of the programs has nine differ-

ent levels. Use either the UP or DOWN arrows to choose the Heart Rate Control program. Press SELECT. The function light “HR”
will be flashing and “H 80” will show in the number screen. You can choose a target heart rate from 80 to 190 in 5 beat increments by
pressing the UP or DOWN arrows. Once your selected target level is showing in the number screen, press SELECT. A set time of
“34:00” will be flashing in the number screen. You may choose a time between 15 minutes and 99 minutes  by pressing the UP or
DOWN arrows. When the time you choose is showing in the number screen, press Select. When you are ready to begin press START.

 * 

For instructions on calculating your target heart rate refer to page 34 of the Treadmill Owner’s Manual. All other programming 

instructions can be found on page 14 of the Treadmill Owner’s Manual.

* Please note there is a 5 minute warm-up period before program will make elevation

 

Changes