Xantrex Technology SW 3000 User Manual
TM
TM
Freedom SW 3000
Sine Wave Inverter/Charger
Sine Wave Inverter/Charger
Owner’s Guide
FREEDOM
SW
3000
In
ve
rter
R
eset Enable
Inv
er
ter
AC
/
On
Cha
rge
Fa
ult
Xanbus
In
ter
fac
e
FREEDOM
SW
3000
Inv
er
ter
R
eset Enable
Inv
erter
AC/
On
Cha
rge
Fa
ult
Xanbus I
nte
rfa
ce
Date
of Manufacture
Serial Number
CAUTION:
To reduce the risk of fire, do not
cover or obstruc
t ventilation openings. Do not mount
in a zero-clearance compartment. Overhea
ting may
result. Do not e
xpose to rain or spray.
INSTALLATION REQUIREMENTS:
Mount this inv
erter/charger only in the orientations
specified in the inst
allation g
uide provided.
WARNING:
Shock hazard. Do not open. No
user serviceable parts. Energized from both AC and
DC sources. Disconnect all
DC sources. Disconnect all
sources before servicing.
Use only ground-fault circuit interrupters (GFCI)
specified in the installation guide supplied. Other
types may fail to operate properly when connected to
this equipment. Refer to ma
specified in the installation guide supplied. Other
types may fail to operate properly when connected to
this equipment. Refer to ma
nual. Charge only
lead-acid batteries. Other ba
ttery types may burst
causing personal injury and damage.
Nominal DC Operating Voltage:
12 Vdc
Nominal AC Output Voltage:
120 Vac , 1Ø
Nominal AC Output Frequency:
60 Hz
Max. Continuous AC Output Current:
25 A
Max. Operating DC Input Current:
320 A
Max. Continuous AC Output at Nominal DC
Input:
Input:
3000 VA at 25°C
Max. Output Surge Power (5 s duration):
6000 VA
Max. DC Input Voltage:
16 Vdc
Max. Ambient Temperature:
50°C
Inverter Mode:
Nominal AC Input Voltage:
120 Vac , 60 Hz, 1Ø
Power Factor:
> 0.95
Charging DC Output Voltage Range:
5.0 - 16.0 Vdc
Max. Continuous Battery Charger DC Current at
Nominal AC Input:
Nominal AC Input:
150 A
Max. AC Input Current:
30 A per line Split Phase,
30 A per line Dual
Charger Mode:
3000W SINEWA
VE INVE
RTER/CHARGER
FSW3000
815-3000
Model
Number
Number
FGA
Number
FREEDOM SW 3000
Designed in Canada
Assembled in China
Assembled in China
DANGER:
To reduce the risk of explosion, do not
install in an area in
which igni
tion-protected
euipment is requi
red.
UL 45
8
CS
A 107.1
-01
3033614
FREEDOM
SW
3000
FREEDOM
SW
3000