Stamina Products A450-255 User Manual
ASSEMBLY INSTRUCTIONS
STEP 4
The
BUTTON HEAD BOLTS(M8x1.25x15mm)(38) are attached on the LEFT and RIGHT UPRIGHT
(2, 3). Refer to detail view B. Tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(38) to bolt the LEFT
UPRIGHT(2), RIGHT UPRIGHT(3), and CONNECTING BAR(7) together securely. Please verify that
the
SENSOR WIRE(28) and SENSOR CONNECTING WIRE(27) have already been connected at the
factory. If it has not been pre-connected, then please plug the
SENSOR WIRE(28) into the SENSOR
CONNECTING WIRE(27) at this time.
STEP 5
Insert the
LEFT HANDRAIL(5) into the RIGHT HANDRAIL(6) and secure with the ROUND HEAD
BOLT(M6x1x15mm)(42). Attach the HANDRAIL ASSEMBLY(5, 6) to the LEFT and RIGHT UPRIGHT(2,
3) with BUTTON HEAD BOLTS(M8x1.25x40)(37) and ARC WASHERS(M8)(51).
STEP 6
Plug the
SENSOR CONNECTING WIRE(27) into the METER CONNECTING WIRE(26). Push the wires
back inside of the
RIGHT UPRIGHT(3). Press the HANDRAIL CAPS(19) onto the LEFT and RIGHT
HANDRAILS(5, 6) to cover the top ends of the LEFT and RIGHT UPRIGHT(2, 3).
8
B.