Fluke 1522 User Manual
7
Display Functions
The insturment operates in any of several modes which determine what infor-
mation is visible in the lower alphanumeric portion of the display. The MODE
button sequences through the menu functions. This button can be pressed re-
peatedly until a desired mode is set. The various modes are listed below in the
order they appear. Also refer to Figure 8.
mation is visible in the lower alphanumeric portion of the display. The MODE
button sequences through the menu functions. This button can be pressed re-
peatedly until a desired mode is set. The various modes are listed below in the
order they appear. Also refer to Figure 8.
Blank - No data shown
Min/Max - Display minimum and maximum measurements (CLR to re-
set)
set)
Demand Logging - Store readings (up to 100) on demand in the memory
registers
registers
Auto Logging - Store readings (up to 10,000) automatically in memory at
user selected intervals
user selected intervals
Delta(x) - Display delta from reference measurement (ENT to set refer-
ence)
ence)
Units: C/
Ω/F/K/R - Set the units of measurement
Rate: 00000 - Set the period for serial transmission
Resol: XXX.XXX - Set the display resolution
CAL MODE - Set probe and instrument calibration parameters (MODE
button must be held for three seconds)
button must be held for three seconds)
Note: Units, Rate, and Resol are temporary modes. The instrument returns to
Blank mode if left in any of these modes when the power is cycled.
Blank mode if left in any of these modes when the power is cycled.
31
7 Display Functions