Coleman 9180-305 User Manual

Connect Frame to Tent

– Insert one end of main tent pole 

onto pin of pin & ring system at tent
corner. (illus. 3)

– Go to opposite end of pole and

gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.

– Repeat for second pole. (illus. 4)

1

Layout & Positioning 
of Tent, Pole Assembly

– Layout and position tent with door

facing desired direction. (illus. 1)

– Unzip door.
– Stake down tent using the rings of the

pin & ring system at the corners of the
tent. Keep the floor taut. (illus. 2)

– Assemble frame poles by 

interlocking shock-corded poles. 
This will make two long poles. 

– Insert the poles diagonally into pole 

sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)

2

Assembled poles

inserted through 

pole sleeves

illus. 1

illus. 4

Tent frame set-up

illus. 2

Tent stake through ring

illus. 3

Insert pole end onto 
pin & ring

SUNDOME

®

7’x7’

– Select a level campsite clear of

rocks, branches and other hard
or sharp objects. 

– Do not set up your tent under trees. 
– For best results in windy conditions,

do not position the door of tent
into the wind.

Rainfly  Part No. 9180-304

Instructions apply to Part Number 9240-707

Part No. 9180-306

Part No. 9180-305