Coleman 9260-107 User Manual

Connect Frame to Tent

–Insert one end of main tent pole end 

onto pin of pin & ring system, at tent 
corner. (illus. 4)

–Go to opposite end of pole and 

gradually apply pressure to the pole 
forming an arch until you are able to 
insert the pin into the pole.

–Repeat for second pole.

Cimmaron

™

XL 10’x 7’

plus Vestibule

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Unzip door.
–Stake down tent corners only, using the

rings at the end of the stake loops.
Keep the floor taut. (illus. 2)

–Assemble frame poles by 

interlocking shock-corded poles.

This will make two long poles.

–Insert the poles diagonally into pole 

sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)

–Fasten frame tie on top of tent over 

both poles. (illus. 1), (illus. 3)

2

–Select a level campsite clear of rocks, 

branches and other hard or sharp objects.

–Do not set up your tent under trees.
–For best results in windy conditions,

do not position the door of tent into
the wind.

–See owners manual for more tips.

Rainfly Part No. 9260-211

Assembled
poles
inserted
through 
pole 
sleeves

Frame tie

Instructions apply to Part Number 9260-107

illus. 1

illus. 2 

Tent stake

through ring

illus.4

Insert pole end onto 
pin & ring

Tent frame 

set-up

illus. 3 

Frame tie

Part No. 9260-212

Part No. 9260-213