Coleman 2000012456 User Manual

Fig. 1

MODEL 2000012456

Verify Connections and

Stake the Tent

Clip

Pole

Fig. 6

Webbing

Loop

Fig. 2

• Verify the clips along the edges of the tent are properly

attached to the frame poles. (Fig. 6)

• Insert the tips of ridge pole into pockets. (Fig. 7)

• Secure the tent by driving stakes through the webbing

loops sewn to the tent base. (Fig. 8)

Ridge

Pole

Pocket

Fig. 7

STITCH

LINE

tEnt sEtup instructiOns

(continued on other side)

Fig. 8

Stake

Tent Pole

Before you begin

• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or

sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

• Do not set up your tent under trees because of potential lightning

strikes or falling tree limbs in inclement weather.

• Secure with

all stakes and guylines provided to prevent property

damage or personal injury.

• For best results in windy conditions, position narrow end of tent

into the wind.

• Do not drop tent.

• Do not bounce tent bag on its end to remove tent, as these

actions may damage the frame.

• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO

PEOPLE TO ASSEMBLE.

• Under no circumstances should this product be used to cover

automobiles, marine products or similar items.

CAUTION: Avoid pinch points when opening and closing the
tent frame.

Extend the Tent Frame

• Extend each of the telescoping leg poles until they snap

into place. The tent will raise as the leg poles are extended.

(Fig. 5)

Raise the Tent

Fig. 5

Lock Button

Ridge Pole

Fig. 3

Fig. 4

• Stand the tent upright with the hub assembly at the

bottom. (Fig. 1)

• Unfold the arms of the tent downward from the center until

they lay flat on the ground. (Fig. 2)

• Unfold the ridge pole. (Fig. 3)