Eureka! Tents Equinox 6 User Manual

Component List:
1 Tent Body  

6 Poles    

1 Fly 

2 Brim Rods

1 Tent Bag 

1 Pole Bag 

1 Stake Bag w/ Stakes

This is a large tent and we recommend that you have help.
With first time set-up or with windy conditions, you will need help.

fig.5

fig.4

fig.1

fig.2

fig.3

fig.6

fig.7

• Unpack the tent bag, pole bag and separate all of the 
 

components. Unroll and unfold the fabric with the Eureka! label up.

 

Locate the hub fitting attached to the center of the roof.  See fig.1.

  Important: Align the hub arms to match the layout of the fabric.

• Make sure the hub and  
 

fabric are still aligned.  

 

Then, insert the  

 

proper corner ring & 

 

 pin into the bottom 

 

 pole section.  

 See 

fig.3. 

• Assemble all of the shockcorded poles. Check  
 

and make sure that each section is fully  

 

seated into the next. Slide a swedged pole  

 

section labeled "TOP " into a hub arm. 

 See 

fig.2. 

• Drape the fly over the tent with "Eureka!" above the 
 

 door. Fit the brim rods into the grommets on the 

 

 tent wall and into the web pockets on the  

 

underside of the fly. See fig.8. 

• Reach under the fly and locate the Velcro®  
 

tabs. Wrap these around  the tent poles to 

 

secure the fly to the frame. Attach the    

 

shockcorded  S-hooks from the fly to the  

 

staked rings. See fig.9. 

• Repeat with a second pole onto  
 

the opposite hub arm to form  

 

and arch. Attach the pole clips  

 

as you work.

 

See fig. 4 & 5.

• Lift the arch and continue attaching all remaining 
 

 poles and clips until you have a free standing 

 

 structure. See fig.6. 

• Move the tent to the desired 
 

 location and stake down all 

 

 corner rings. See fig.7.

NOTE: In the event of strong wind, we recommend that 
 

 the storm rings on the fly be guyed out. See fig.10.

fig.8

fig.9

fig.10.

REV. E  11.07