Coleman HEKA X2 User Manual

1

2

– Layout and position tent with door facing 

desired direction. (illus. 2)

– For best results in windy conditions, postion 

door or back of tent into the wind.

– Stake down tent corners. Keep the floor 

taut. Unzip door. (illus. 1, illus. 2)

– Assemble Frame Poles by interlocking the 

shock-corded sections. This will make one long 
Main Pole and two shorter Crossover Poles. 

– Insert the Main Pole (Red) through the pole 

sleeves and through the grommet going from 
the back of the tent to the front of the vestibule 
webbing strap. (illus. 2, illus. 3)

– Insert the silver Crossover Pole in the front set 

of pole sleeves going side to side. (illus. 2)

– Insert the gold Crossover Pole in the back set 

of pole sleeves going side to side. (illus. 2)

Part No. 9830-1341

Part No. 9850-3071

Crossover Poles through pole sleeves

Back Pole (gold)

Main Pole (red)

illus. 1 
Tent stake
through
Loop

Long pole through

grommet 

Insert Pole Tip into

grommet

Part No. 9830-1441

Part No. 9830-1141

Part No. 9830-1241

– Insert Pole Tip of Main Tent pole into the grommet 

on the webbing at the back of the tent (illus. 5).

– Go to opposite end of the Main Pole and 

gradually apply pressure to the pole, forming an 
arch, until you are able to insert the pole tip 
into the pole pocket at the point of the pole flap. 
(illus. 4, illus. 5)

– Insert the Crossover Pole into the grommet 

on the webbing located on the side of the 
tent. The front pole goes toward the back.
The back pole angles toward the front. The 
Crossover Poles will cross on each side. 
(illus. 4, illus. 5)

Main Pole

Front Crossover Pole

Back 

Crossover Pole

Front Pole (silver)