Coleman 96X7 User Manual

Connect Frame to Tent

–Insert one pin into the end of main tent 

pole at tent corner. (illus. 3, illus. 4)

–Go to opposite end of pole and 

gradually apply pressure to the pole 
forming an arch until you are able to 
insert the pin into the pole end.

–Repeat for second pole.
–Insert pin into the end of side pole, go to 

opposite end of pole and apply pressure 
until you arch the pole and can insert the  
pin into the pole. (illus. 3, illus. 4)

–Repeat for other side pole.
–Tie top frame tie. (illus. 5)

Eagle Rock

™

9’6”x7’ 

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Unzip door.
–Stake down tent corners only, using the

stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)

–Assemble frame poles by interlocking 

shock-corded poles. (four poles)

–Insert the poles into pole sleeves.The 

longer black poles should cross forming 
an “X” in the middle of tent. The shorter 
side gray poles insert into sleeves
running front to back. (illus. 1)

2

–Select a level campsite clear 

of rocks, branches and other 
hard or sharp objects.

–Do not set up your tent 

under trees.

–For best results in windy 

conditions position the end 

of tent into the wind.

Part No. 9277C950

Front Door 

Side Poles

Assembled
poles
inserted
through 
pole 
sleeves

Instructions apply to Part Number 9277C957

illus. 1

illus. 2 

Tent stake 

through ring 

on stake loop

illus. 4

Tent frame 

set-up

Part No. 9277B953

Part No. 9277B952

illus.3
Insert pin into pole end

illus. 5

Frame Tie

Part No. 9277C951