Coleman 9272-162 User Manual

Connect Frame to Tent

–Insert the pin into the end of the black main

tent pole at the rear of the tent. 
(illus. 3, illus. 4)

–Go to opposite end of pole and gradually 

apply pressure to the pole forming an arch 
until you are able to insert the pin into the 
pole end. (works best standing in the door, 
with two people) Repeat for second pole.

–Insert the pin on the side into the side pole  

end. Go to opposite end of pole and 
gradually apply pressure to the pole forming 
an arch until you are able to insert the pin 
into the pole end. (illus. 3, illus. 4)

Monterey

™

16’x12’ 

1

Layout & Positioning of Tent, 
Pole Assembly

–Layout and position tent with door  

facing desired direction. (illus. 1)

–Unzip door.
–Stake down tent, using the rings on the 

stake loops. Keep the floor taut. (illus. 2) 

–Assemble frame poles by interlocking 

shock-corded poles. (three poles)

–Insert the main tent poles through the two

pole sleeves with black trim. The poles
will cross in center of the tent.(illus. 1)

–Insert gray side pole through the pole

sleeves running parallel to the door.
This will go from side to side.

2

–Select a level campsite clear of 

rocks, branches and other hard or 
sharp objects. 

–Do not set up your tent under trees. 
–For best results in windy conditions, 

position the end of tent into the wind.

Front Door 

Black Main Poles
through pole sleeves

Gray Side Pole
through pole sleeves

Instructions apply to Part Number 9272-162

illus. 1

illus. 2 

Tent stake 

through ring 

on stake loop

illus. 4

Tent frame 

set-up

Part No. 9272-302

Part No. 9272-306

Part No. 9272-308

Part No. 9272-304

illus.3
Insert pin into pole end

Side Pole