Pelco C1300M-C (11/08) User Manual
14
C1300M-C (11/08)
Display Setup
Display setup allows you to program how labels are displayed on the monitor. The following labels
are available:
are available:
PRESET LABEL
Identifies preset.
ZONE LABEL
Identifies zone.
ZOOM
Identifies the amount of magnification.
AZIMUTH*/
Amount of pan from 0° and the amount of tilt from 0° horizontal.
ELEVATION**
DIRECTION
Displays compass direction.
ALARM MESSAGE
Displays activated alarm.
A preset label is displayed when a preset is called. A zone label is displayed when the system
moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation and
direction labels are displayed when pan/tilt is activated. An alarm message appears on the monitor
when an alarm occurs.
moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation and
direction labels are displayed when pan/tilt is activated. An alarm message appears on the monitor
when an alarm occurs.
The following settings are available for each label:
*Azimuth is the pan angle from 0 to 359 degrees.
**Elevation is the tilt position from +90 (horizon) to -90 degrees.
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
PRESET LABEL
2 (SECS)
ZONE LABEL
2 (SECS)
ZOOM
2 (SECS)
AZIMUTH/ELEVATION
2 (SECS)
DIRECTION
OFF
ALARM MESSAGE
2 (SECS)
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
RESTORE FACTORY DEFAULTS
BACK
EXIT
EXIT
DISPLAY SETUP
OFF
Label is not displayed when activated.
CONSTANT
The label is continually displayed when activated.
2 SECONDS
The label is displayed for 2 seconds after activation.
5 SECONDS
The label is displayed for 5 seconds after activation.
10 SECONDS
The label is displayed for 10 seconds after activation.