Pelco C1300M-C (11/08) User Manual
C1300M-C (11/08)
19
Quick Programming Guide
(See Page 9)
AUTO IRIS
Auto iris is the lens function that automatically opens and closes the iris in response to changing
light conditions.
light conditions.
Program the auto iris to operate automatically or at a user-defined level.
If auto iris is in the auto mode, it will remain that way until the iris is manually opened or closed. The
system will return to auto mode when it is panned or tilted more than 15 degrees.
system will return to auto mode when it is panned or tilted more than 15 degrees.
Auto Iris Level
Auto iris level is the numeric value the auto iris uses to maintain the brightness level of the camera.
Increase the value to brighten the scene. Decrease the level to darken the scene. This setting can be
adjusted if the video level in the auto iris mode is too bright or too dark.
Increase the value to brighten the scene. Decrease the level to darken the scene. This setting can be
adjusted if the video level in the auto iris mode is too bright or too dark.
If backlight compensation is ON, decrease the Auto Iris Level setting.
Auto Iris Peak
Increasing the peak value will cause the auto iris circuit to react more to highlights or “peaks” in the
picture. Decreasing this value will cause it to use the average video level to adjust the iris.
picture. Decreasing this value will cause it to use the average video level to adjust the iris.
AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and
sharpening the edges in the picture.
sharpening the edges in the picture.
There are two settings:
AUTO WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color
temperature range. The default setting for auto white balance is ON.
temperature range. The default setting for auto white balance is ON.
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
TYPE OF LIGHTING
T1
AUTO FOCUS
ON
ZOOM LIMIT
X184
ZOOM SPEED
MEDIUM
LOW LIGHT LIMIT
2
IR CUT FILTER*
AUTO
AUTO IR LEVEL*
DUSK
<ADVANCED SETTINGS>
BACK
EXIT
EXIT
CAMERA
SHUTTER SPEED
AUTO
AGC LIMIT
28
AUTO IRIS
AUTO
AUTO IRIS LEVEL
91
AUTO IRIS PEAK
16
AUTO SHARPNESS
ON
SHARPNESS LEVEL
26
AUTO WHITE BALANCE
ON
R GAIN
146
B GAIN
294
BACKLIGHT COMP
OFF
VIDEO LEVEL
HIGH
WIDE DYNAMIC RANGE*
OFF
BACK
EXIT
EXIT
ADVANCED SETTINGS
* Available only with the 23X day/night camera.
OFF
Auto iris is disabled, and control is always manual.
AUTO (default)
The iris is adjusted automatically to produce a constant video output as deter-
mined by the Auto Iris Level setting.
mined by the Auto Iris Level setting.
ON (default)
The camera automatically maintains a normal sharpness mode.
OFF
The sharpness of the picture is set manually by programming the sharpness
level. Sharpness level settings range from 0-63.
level. Sharpness level settings range from 0-63.
R GAIN
Adjusts the picture output in the red range. As you change the value, you will
see the color change on your monitor.
see the color change on your monitor.
B GAIN
Adjusts the picture output in the blue range. As you change the value, you will
see the color change on your monitor.
see the color change on your monitor.